- Chris Cadotto's DODGE DODGE RAM SST has annihilated the quarter mile in 6.59@212.46.
- In 2nd and 3rd place are Gary Soulages's Lightning (6.64@212.13) and Billy Mitchell's S-10 (6.73@217).
- Chris Cadotto's DODGE DODGE RAM SST broke through the eighth mile beams with a 4.29@172.
- In 2nd and 3rd place are Gary Soulages's Lightning (4.34@176.70) and Neal Light's S10 (4.350@164).
- Neal Light's Chevy S10 is the holeshot champ, taking only 1.019 seconds to cross the 60' mark on Slicks.
- In 2nd and 3rd place are mike jones sr.'s s-10 (1.02 on Slicks) and Gary Soulages's Lightning (1.072 on 10.5).
Justin West
1994 Dodge Dakota
This truck is currently ranked 980th out of 1395
That makes it quicker than 30% of the other trucks here.
Compared to the rest of the DragTruk field, this particular truck is: In no big hurry
62 K
|
Name: |
Justin
West
|
Email: |
jwest318@yahoo.com
|
Homepage: |
|
Best 1/4 ET @ mph: |
14.511@95.37
|
Best 1/8 ET @ mph: |
9.281@75.14
|
Best 60 ft: |
2.110 on drag radials
|
Engine: |
318
|
Transmission: |
A518
|
|
|
Truck Specs:
1994 Dakota SLT, 318 ci, auto
Truck Modifications:
- Mopar PCM
- M1 intake manifold
- port & polished TB
- home made air intake K&N
- IAT adjuster
- ASP under drive crank pulley
- Thorley Headers
- 3" cutout
- Quick time performance electronic opener
- High flow 3" cat
- Magnaflow 3" cat back
- Trac Loc sure grip limited slip
- Richmond 4.10 Gears
- Trans Go Shift kit
- Wheel spacers
- 2000 Dakota 15X8 inch rims
- Harland Sharp 1.7 RR's
- hardened pushrods
- valve seals
- R/T valve springs
- 8.5 MSD wires
- MSD 6A
- MSD Blaster SS coil
Upcoming Modifications:
- B&M Megashifter
- Slicks
- new seats
Owner Comments:
Stock with just a 3" cat back and 100K miles ran 16.49@83 (all runs done at SIR in Tucson 3075ft) and dyno'd 183rwhp-240rwtq. After mod's ran 15.19@89, dyno'd 220rwhp-250rwtq both pull flat up to 5200 rpms. I think the stock exhaust manifolds are restricting the flow. Best 60" 2.192 but most of the time 2.3's some 2.2's. Well the headers did it went up to Phoenix and got one run on slicks (thanks Ryan) and ran a 14.51@95.37. Last Dyno 230 HP 270 TQ up to 5400 rpms. At SIR a month later ran a 14.99 at 92
This entry was last updated on
Tuesday January 21, 2003 at 6:17 PM EST
|
|
This page was last updated on Sun Aug 4 15:54:00 EDT 2013.